Navigate

Printers

RSS Feed Subscribe

Manuals and Driver (12)

View 12 articles

WPL305 - How do you change the WPL 305 printer's settings when switching from direct thermal to thermal transfer ( DT / TT ) or vice-versa?

Posted by Internal User in 2017-04-13
in Hardware > Printers
WPL305 - Is there an available USB version of the WPL 305?

Posted by Internal User in 2017-04-10
in Hardware > Printers
Printers not responding after assigning an IP address with the admin utility.

Posted by Internal User in 2017-04-10
in Hardware > Printers
Do Wasp's WPL printers support ZPL or EPL commands?

Posted by Internal User in 2018-10-04
in Hardware > Printers
WPL305 - The ribbon and labels were installed incorrectly. Now the printer head is all gummed up - I need to clean or replace the printer head.

Posted by Internal User in 2023-04-18
in Hardware > Printers
WPL305 - How to reset and recalibrate the WPL305 printer

Posted by Internal User in 2017-04-10
in Hardware > Printers
WPL305: During printing labels are skipped, are feeding 2 or 3 labels at a time instead of 1, or the printout is not striking on the label.

Posted by Internal User in 2017-10-25
in Hardware > Printers
600 Thermal Printer: How to: How do I set up the W-600 and Wasp Labeler using Windows 2000 or XP?

Posted by Internal User in 2017-04-10
in Hardware > Printers
600 Thermal Printer - Is there a way of using the W-600 in a DOS environment?

Posted by Internal User in 2017-04-10
in Hardware > Printers
600 Thermal Printer - How to: How do I change the LCD display language on the W-600?

Posted by Internal User in 2017-04-10
in Hardware > Printers
600 Thermal Printer: What is the smallest Label size you can print on a W-600?

Posted by Internal User in 2017-04-10
in Hardware > Printers
600 Thermal Printer: I am trying to use a label and in the printer setup there is no mention of this label size, is there any reason for this? Is there any way to get it to show?

Posted by Internal User in 2017-04-10
in Hardware > Printers
Printer Programming Manuals: WPL, ZPL, EPL

Posted by Internal User in 2022-04-27
in Hardware > Printers
Unable to calibrate labels longer than 10 inches with WPL610

Posted by Internal User in 2023-01-20
in Hardware > Printers
Thermal Receipt Printers: Can you use generic paper rolls in Wasp's Receipt printer?

Posted by Internal User in 2018-02-05
in Hardware > Printers
WRP8055 Thermal Printer - I'm looking for code that will allow my homebrew POS application to communicate with the Wasp Receipt Printer.

Posted by Internal User in 2017-04-10
in Hardware > Printers
Thermal Receipt Printers: Printer Driver (v3.51, older, deprecated)

Posted by Internal User in 2023-01-20
in Hardware > Printers
Can an inkjet or laser printer be used for barcode printing?

Posted by Internal User in 2017-04-10
in Hardware > Printers
Which is better Thermal Transfer or Direct Transfer printing?

Posted by Internal User in 2017-04-10
in Hardware > Printers
Installing Wasp Printers onto Windows 2003 Server

Posted by Internal User in 2017-04-10
in Hardware > Printers
Is there any way ZPL printer commands can be sent directly to the printer using a client side, web-based Java or VB script?

Posted by Internal User in 2017-04-10
in Hardware > Printers
How to update WPL305E firmware

Posted by Sicaro Burnett in 2024-04-25
in Hardware > Printers
Wasp Receipt Printer with QuickBooks Point of Sale (POS)

Posted by Jason Whitmer in 2017-06-02
in Hardware > Printers
WPL305: ribbon feeds out with label when printing

Posted by Sicaro Burnett in 2022-09-27
in Hardware > Printers
DiagTool: WPL Printer Diagnostic Utility

Posted by Sicaro Burnett in 2021-12-15
in Hardware > Printers
WPL612 WPL610 WPL608 Printer Resources

Posted by Sicaro Burnett in 2023-01-20
in Hardware > Printers
WPL Label Printer: Installing driver to a network printer

Posted by Scott Leonard in 2019-01-23
in Hardware
WPL Printers: How do I calibrate the printer with labels that have black lines on the backing?

Posted by Jason Whitmer in 2017-04-10
in Hardware > Printers
WPL406 with Peeler module - loading the media (labels)

Posted by Scott Leonard in 2023-01-20
in Hardware
WPL612 600dpi Printer Driver

Posted by Sicaro Burnett in 2017-08-24
in Hardware > Printers
WCD5000 Cash Drawer: printer driver settings to open cash drawer at print

Posted by Scott Leonard in 2017-04-10
in Hardware > Printers
Driver & Quick Start Guide for Printer Server add-on for WPL606 & WPL305

Posted by Scott Leonard in 2017-04-12
in Hardware > Printers
How to calibrate the printer when labels or tags have a notch

Posted by Scott Leonard in 2017-08-25
in Hardware > Printers
Sample labels and ribbon included with WPL printers

Posted by Scott Leonard in 2022-03-24
in FAQs
WHC25: The printer stops in the middle of the wristband rather than advancing to the perforation

Posted by Jason Whitmer in 2022-03-01
in Hardware > Printers
Default Printer keeps changing in Windows 10

Posted by Jason Whitmer in 2017-04-10
in Hardware > Printers
WPL305: How do I set the printer to use Direct Thermal?

Posted by Jason Whitmer in 2017-04-10
in Hardware > Printers
WPL406: label feed problems, grinding noise, print quality problems (print head not latched)

Posted by Scott Leonard in 2017-06-22
in Hardware > Printers
Wasp label printer is not displayed in Devices and Printers (Windows 10 and Windows 8). I can print to it, but the label size is incorrect.

Posted by Jason Whitmer in 2018-08-17
in Hardware > Printers
Windows Printer & Printing Subsystem problems

Posted by Scott Leonard in 2018-04-24
in FAQs
WPL612 and WPL610 Printers: Wiring Inspection and/or Print Head Replacement

Posted by Scott Leonard in 2022-04-01
in Hardware > Printers
Thermal Receipt Printers: Printer Driver (v4.51)

Posted by Scott Leonard in 2022-09-20
in Hardware > Printers
WPL308M Printer Resources

Posted by Scott Leonard in 2024-07-26
in Hardware > Printers
DiagTool: Capturing a print job to a text file

Posted by Scott Leonard in 2019-01-02
in Hardware > Printers
WPL612: how to mount a 1-inch core roll of labels

Posted by Scott Leonard in 2019-02-14
in Hardware > Printers
WPL308: Wifi module installation

Posted by Scott Leonard in 2024-07-26
in Hardware > Printers
WPL614 & WPL618: how to implement a Pause button

Posted by Scott Leonard in 2019-08-07
in Hardware > Printers
WPL614: various errors - platen roller disengaged

Posted by Scott Leonard in 2019-08-07
in Hardware > Printers
WPL Printer Troubleshooting: Use Dump Mode to save print job to USB stick or memory card

Posted by Scott Leonard in 2022-04-14
in Hardware > Printers
Configure Wifi on WPL printer

Posted by Scott Leonard in 2024-07-26
in Hardware > Printers

Get in touch

Start a chat session

WPL305 - How do you change the WPL 305 printer's settings when switching from direct thermal to thermal transfer ( DT / TT ) or vice-versa?

WPL305 - Is there an available USB version of the WPL 305?

Printers not responding after assigning an IP address with the admin utility.

Do Wasp's WPL printers support ZPL or EPL commands?

WPL305 - The ribbon and labels were installed incorrectly. Now the printer head is all gummed up - I need to clean or replace the printer head.

WPL305 - How to reset and recalibrate the WPL305 printer

WPL305: During printing labels are skipped, are feeding 2 or 3 labels at a time instead of 1, or the printout is not striking on the label.

600 Thermal Printer: How to: How do I set up the W-600 and Wasp Labeler using Windows 2000 or XP?

600 Thermal Printer - Is there a way of using the W-600 in a DOS environment?

600 Thermal Printer - How to: How do I change the LCD display language on the W-600?

600 Thermal Printer: What is the smallest Label size you can print on a W-600?

600 Thermal Printer: I am trying to use a label and in the printer setup there is no mention of this label size, is there any reason for this? Is there any way to get it to show?

Printer Programming Manuals: WPL, ZPL, EPL

Unable to calibrate labels longer than 10 inches with WPL610

Thermal Receipt Printers: Can you use generic paper rolls in Wasp's Receipt printer?

WRP8055 Thermal Printer - I'm looking for code that will allow my homebrew POS application to communicate with the Wasp Receipt Printer.

Thermal Receipt Printers: Printer Driver (v3.51, older, deprecated)

Can an inkjet or laser printer be used for barcode printing?

Which is better Thermal Transfer or Direct Transfer printing?

Installing Wasp Printers onto Windows 2003 Server

Is there any way ZPL printer commands can be sent directly to the printer using a client side, web-based Java or VB script?

How to update WPL305E firmware

Wasp Receipt Printer with QuickBooks Point of Sale (POS)

WPL305: ribbon feeds out with label when printing

DiagTool: WPL Printer Diagnostic Utility

WPL612 WPL610 WPL608 Printer Resources

WPL Label Printer: Installing driver to a network printer

WPL Printers: How do I calibrate the printer with labels that have black lines on the backing?

WPL406 with Peeler module - loading the media (labels)

WPL612 600dpi Printer Driver

WCD5000 Cash Drawer: printer driver settings to open cash drawer at print

Driver & Quick Start Guide for Printer Server add-on for WPL606 & WPL305

How to calibrate the printer when labels or tags have a notch

Sample labels and ribbon included with WPL printers

WHC25: The printer stops in the middle of the wristband rather than advancing to the perforation

Default Printer keeps changing in Windows 10

WPL305: How do I set the printer to use Direct Thermal?

WPL406: label feed problems, grinding noise, print quality problems (print head not latched)

Wasp label printer is not displayed in Devices and Printers (Windows 10 and Windows 8). I can print to it, but the label size is incorrect.

Windows Printer & Printing Subsystem problems

WPL612 and WPL610 Printers: Wiring Inspection and/or Print Head Replacement

Thermal Receipt Printers: Printer Driver (v4.51)

WPL308M Printer Resources

DiagTool: Capturing a print job to a text file

WPL612: how to mount a 1-inch core roll of labels

WPL308: Wifi module installation

WPL614 & WPL618: how to implement a Pause button

WPL614: various errors - platen roller disengaged

WPL Printer Troubleshooting: Use Dump Mode to save print job to USB stick or memory card

Configure Wifi on WPL printer