Navigate
Wasp Helpdesk
  • Register

  • or
  • Login
    Need a password reminder?
or
Contact Us
  • Get in touch

    Send us an email

  • Start a chat session

  • Knowledgebase Read help articles
  • News News & updates
  • Contact Us We are here to help
  • Training View our options
  • Product Sunsets Non-Supported Products
Barcode System Consult
Barcode Printer Consult
Barcode Label Consult
  • Portal
  • Knowledgebase
  • Hardware
  • Printers
  • WPL305 - How to reset and recalibrate the WPL305 printer
Subscribe Download PDF

WPL305 - How to reset and recalibrate the WPL305 printer

Internal User
2017-04-10
in Printers

Reset the 305 Printer:

1.  Turn the printer off.

2.  Press and hold the feed button.

3.  Turn the printer on while holding the feed button.

4.  Watch the light blink orange once, red 5 times, orange 5 times, green and release the feed key.  The light will blink green 5 times and you can release the button any time before the 5th green blink.

5.  Turn the printer off.



Recalibrate the 305 printer:

1.  Turn the printer off.

2.  Press and hold the feed button.

3.  Turn the printer on while holding the feed button.

4.  Watch the light blink orange once, red 5 times, orange and release the feed key.  The light will blink orange 5 times and you can release the button any time before the 5th orange blink.

5.  Turn the printer off. 



The printer should now be recalibrated.

 

For further instruction follow the Link bellow.

 

http://www.waspbarcode.com/printers/WPL305_Video.asp

Rate the quality of this page

This page was helpful :) :( This page was not helpful

20 of 43 people found this page helpful

Related Pages

  • WPL305e tutorial video: Loading ribbon and media (labels)

Quick Jump
  • Wasp Helpdesk
  • Knowledgebase
  • News
  • Contact Us
Top
Helpdesk software provided by Deskpro