Navigate

Mobile Computers

RSS Feed Subscribe

WDT3250: Setting up wireless network

Posted by Internal User in 2018-04-19
in Hardware > Mobile Computers
Muliple Products - Retains the MobileAsset database after cold boot

Posted by Internal User in 2017-04-10
in Hardware > Mobile Computers
MobileAsset v6: Error on Mobile Computer after updating to new patch version - "Failed to process parm record: IndexOutOfRangeException"

Posted by Internal User in 2017-04-10
in Hardware > Mobile Computers
InventoryControl - Roaming between multiple access points

Posted by Max Holden in 2017-04-10
in Hardware > Mobile Computers
delete

Posted by Tom Tate in 2019-05-23
in Hardware > Mobile Computers
2200 Dos Terminal: How can I enable Code 39 Full ASCII symbology on the WDT2200?

Posted by Internal User in 2017-04-10
in Hardware > Mobile Computers
WDT2200 - How do you turn on Interleaved 2 of 5 symbology on the WDT2200?

Posted by Tom Tate in 2017-04-10
in Hardware > Mobile Computers
2200 Dos Terminal: Error: Cannot log out the WDT2200 unit, need to reset and send program and info again.

Posted by Internal User in 2017-04-10
in Hardware > Mobile Computers
My WDT2200 does not scan my Interleaved 2 of 5 (I 2of5) barcodes.

Posted by Internal User in 2017-04-10
in Hardware > Mobile Computers
WPA1200 - Error: USI Error-Scanner Failed

Posted by Jason Whitmer in 2017-04-10
in Hardware > Mobile Computers
WDT90 & WDT92 Mobile Computer: How to perform a Warm Boot, Cold Boot, or Clean Boot

Posted by Sicaro Burnett in 2023-01-20
in Hardware > Mobile Computers
How to manually cold boot the WPA1000

Posted by Jason Whitmer in 2023-01-19
in Hardware > Mobile Computers
WDT60 Warm/Cold/Clean Boot Procedures

Posted by Jason Whitmer in 2025-01-07
in Hardware > Mobile Computers
delete

Posted by Jason Whitmer in 2019-05-23
in Hardware > Mobile Computers
Multiple products: Windows 8.1 does not allow .Net Framework to install properly

Posted by Jason Whitmer in 2025-01-07
in Hardware > Mobile Computers
MobileAsset v7 on a mobile device: Switching database, or respecifying the Service URL

Posted by Scott Leonard in 2017-04-10
in Hardware
MobileAsset v7: Manual installation of CAB files to a WPA1000 mobile device

Posted by Scott Leonard in 2023-01-19
in Hardware
MobileAsset v7: How to gather log files from a mobile device (Android, iOS, Windows Mobile / CE)

Posted by Scott Leonard in 2018-01-05
in Hardware
WDT60 is not recognized by Windows Mobile Device Center, but the PC does show it as Datalogic Serial

Posted by Jason Whitmer in 2017-04-10
in Hardware > Mobile Computers
HC1 & WPA1000-II: Network configuration to enable name resolution and/or internet browsing

Posted by Scott Leonard in 2023-01-20
in Hardware > Mobile Computers
MobileAsset v6: Setting up mobile device, error: "Failed to get current supported application version: failed to convert MOBILEASSET_PPC_APP_CURRENT_VERSION string"

Posted by Scott Leonard in 2023-01-20
in Hardware > Mobile Computers
MobileAsset v7: When trying to log in, Android & iOS devices receive "MobileAsset Request failed: internal server error (500)"

Posted by Scott Leonard in 2017-04-10
in Hardware > Mobile Computers
Summit Client Utility: How to set up wireless, and choose from multiple SSIDs (wireless networks)

Posted by Scott Leonard in 2023-01-23
in Hardware > Mobile Computers
MobileAsset v7 Standard with a Windows Mobile/CE Device: Initial program installation fails, or the device won't sync over the cable.

Posted by Scott Leonard in 2023-01-23
in Hardware > Mobile Computers
InventoryControl: Mobile device in wireless mode gives error "Specified argument was out of the range of valid values"

Posted by Scott Leonard in 2025-01-06
in Hardware > Mobile Computers
WDT60: Network configuration to enable name resolution and/or internet browsing

Posted by Scott Leonard in 2025-01-06
in Hardware > Mobile Computers
Windows Mobile Device Center settings interfere with mobile device's connection to Wasp service

Posted by Scott Leonard in 2025-01-06
in Cloud > AssetCloud
MobileAsset v6.3 on HC1: Launching app gives .NET CF Initialization Error

Posted by Scott Leonard in 2025-01-06
in Hardware > Mobile Computers
Windows Mobile/CE devices: How to connect to an unadvertised wifi network (SSID) via the Summit Client Utility (manual setup)

Posted by Scott Leonard in 2025-01-06
in Hardware > Mobile Computers
MobileAsset v7: Setting up a Windows Mobile/CE device, you receive Error 2: Cannot Create Process

Posted by Scott Leonard in 2025-01-06
in Hardware > Mobile Computers
DT10: Adjusting memory settings

Posted by Scott Leonard in 2025-01-06
in Hardware > Mobile Computers
MobileAsset v7: Attempting to set up mobile device, error: Mobile files do not exist on the device...

Posted by Scott Leonard in 2025-01-06
in Hardware > Mobile Computers
Windows Mobile/CE devices: Summit is Unable to select a profile with WPA2 and TKIP.

Posted by Scott Leonard in 2025-01-06
in Hardware > Mobile Computers
Windows Mobile/CE Devices: thorough driver removal from Device Manager

Posted by Scott Leonard in 2025-01-07
in FAQs
WDT90 & WDT92: Update the backlight & sleep settings so the device stays awake longer

Posted by Scott Leonard in 2025-01-06
in Hardware > Mobile Computers
WDT90: How to disable and enable wifi card (Summit status is Externally Disabled)

Posted by Scott Leonard in 2025-01-07
in Hardware > Mobile Computers
MobileAsset v7: Database transfer to mobile device fails at step 2 of 3; service log mentions FIPS

Posted by Scott Leonard in 2021-02-08
in Hardware > Mobile Computers
HC1 mobile device: Encryption and EAP choices

Posted by Scott Leonard in 2018-05-03
in Hardware > Mobile Computers
HC1 shows in Device Manager but not in Windows Mobile Device Center

Posted by Jason Whitmer in 2019-05-22
in Hardware > Mobile Computers
Windows Mobile Device Center starts to install, but the progress bar reverses and does not install

Posted by Scott Leonard in 2025-01-07
in Hardware > Mobile Computers
Windows Mobile Device Center: Device Connection Settings in the Registry

Posted by Scott Leonard in 2025-01-07
in Hardware > Mobile Computers
DR2 & DR3 mobile devices: Configure the barcode scan engine to send a leading 0 when reading a UPC-A barcode (to match the camera method)

Posted by Scott Leonard in 2018-04-18
in Cloud > AssetCloud
HC1 - How to set up Data Editing for scanning barcodes

Posted by Jason Whitmer in 2018-11-06
in Hardware > Mobile Computers
DR5 & DR6 Factory Reset Steps

Posted by Nathaniel Summers in 2024-12-10
in Hardware > Mobile Computers
DR5: enabling the Long Range Scanner Grip

Posted by Scott Leonard in 2022-02-03
in Hardware > Mobile Computers
WDT950 mobile device notes

Posted by Scott Leonard in 2024-11-14
in Hardware > Mobile Computers
DR6/ DR5 mobile device: scan engine appears to work, but no data (or partial data) is entered into app fields

Posted by Scott Leonard in 2025-04-10
in Hardware > Mobile Computers
DR5 mobile device: How to set Static IP address

Posted by Scott Leonard in 2024-03-05
in Hardware > Mobile Computers
WDT950 Factory Reset (difficult devices)

Posted by Scott Leonard in 2023-08-04
in Hardware > Mobile Computers
What RFID types are compatible with the DR6 RFID trigger?

Posted by Jason Whitmer in 2025-06-20
in Hardware > Mobile Computers

Get in touch

Start a chat session

WDT3250: Setting up wireless network

Muliple Products - Retains the MobileAsset database after cold boot

MobileAsset v6: Error on Mobile Computer after updating to new patch version - "Failed to process parm record: IndexOutOfRangeException"

InventoryControl - Roaming between multiple access points

delete

2200 Dos Terminal: How can I enable Code 39 Full ASCII symbology on the WDT2200?

WDT2200 - How do you turn on Interleaved 2 of 5 symbology on the WDT2200?

2200 Dos Terminal: Error: Cannot log out the WDT2200 unit, need to reset and send program and info again.

My WDT2200 does not scan my Interleaved 2 of 5 (I 2of5) barcodes.

WPA1200 - Error: USI Error-Scanner Failed

WDT90 & WDT92 Mobile Computer: How to perform a Warm Boot, Cold Boot, or Clean Boot

How to manually cold boot the WPA1000

WDT60 Warm/Cold/Clean Boot Procedures

delete

Multiple products: Windows 8.1 does not allow .Net Framework to install properly

MobileAsset v7 on a mobile device: Switching database, or respecifying the Service URL

MobileAsset v7: Manual installation of CAB files to a WPA1000 mobile device

MobileAsset v7: How to gather log files from a mobile device (Android, iOS, Windows Mobile / CE)

WDT60 is not recognized by Windows Mobile Device Center, but the PC does show it as Datalogic Serial

HC1 & WPA1000-II: Network configuration to enable name resolution and/or internet browsing

MobileAsset v6: Setting up mobile device, error: "Failed to get current supported application version: failed to convert MOBILEASSET_PPC_APP_CURRENT_VERSION string"

MobileAsset v7: When trying to log in, Android & iOS devices receive "MobileAsset Request failed: internal server error (500)"

Summit Client Utility: How to set up wireless, and choose from multiple SSIDs (wireless networks)

MobileAsset v7 Standard with a Windows Mobile/CE Device: Initial program installation fails, or the device won't sync over the cable.

InventoryControl: Mobile device in wireless mode gives error "Specified argument was out of the range of valid values"

WDT60: Network configuration to enable name resolution and/or internet browsing

Windows Mobile Device Center settings interfere with mobile device's connection to Wasp service

MobileAsset v6.3 on HC1: Launching app gives .NET CF Initialization Error

Windows Mobile/CE devices: How to connect to an unadvertised wifi network (SSID) via the Summit Client Utility (manual setup)

MobileAsset v7: Setting up a Windows Mobile/CE device, you receive Error 2: Cannot Create Process

DT10: Adjusting memory settings

MobileAsset v7: Attempting to set up mobile device, error: Mobile files do not exist on the device...

Windows Mobile/CE devices: Summit is Unable to select a profile with WPA2 and TKIP.

Windows Mobile/CE Devices: thorough driver removal from Device Manager

WDT90 & WDT92: Update the backlight & sleep settings so the device stays awake longer

WDT90: How to disable and enable wifi card (Summit status is Externally Disabled)

MobileAsset v7: Database transfer to mobile device fails at step 2 of 3; service log mentions FIPS

HC1 mobile device: Encryption and EAP choices

HC1 shows in Device Manager but not in Windows Mobile Device Center

Windows Mobile Device Center starts to install, but the progress bar reverses and does not install

Windows Mobile Device Center: Device Connection Settings in the Registry

DR2 & DR3 mobile devices: Configure the barcode scan engine to send a leading 0 when reading a UPC-A barcode (to match the camera method)

HC1 - How to set up Data Editing for scanning barcodes

DR5 & DR6 Factory Reset Steps

DR5: enabling the Long Range Scanner Grip

WDT950 mobile device notes

DR6/ DR5 mobile device: scan engine appears to work, but no data (or partial data) is entered into app fields

DR5 mobile device: How to set Static IP address

WDT950 Factory Reset (difficult devices)

What RFID types are compatible with the DR6 RFID trigger?