This configuration document allows common configurations  of the WPS1500 scanner.
https://dl.waspbarcode.com/kb/scanner/WPS1500/WPS1500-multi-fix-config-sheet.pdf

Each item is optional. Multiple items can be specified in one programming session.

1. Disable Label ID: Remove unwanted leading character. Most users want this.

2. Enable Data Matrix 2D barcodes.

3. Enable QR Code 2D barcodes.

4. Enable 2D Inverse + Normal reading at the same time.

5. Enable Code 39 Full ASCII.

Start with Enter/Exit Programming. Then scan the desired configuration barcodes. Then finish by scanning Enter/Exit Programming again. If you need to reset all scanner programming, scan the Default Settings barcode at the bottom of the sheet.