Navigate
Wasp Helpdesk
  • Register

  • or
  • Login
    Need a password reminder?
or
Contact Us
  • Get in touch

    Send us an email

  • Start a chat session

  • Knowledgebase Read help articles
  • News News & updates
  • Contact Us We are here to help
  • Training View our options
  • Product Sunsets Non-Supported Products
Barcode System Consult
Barcode Printer Consult
Barcode Label Consult
  • Portal
  • Knowledgebase
  • Hardware
  • Scanners
  • WCS3900/3905/3950
  • Program the WLR2900, WCS3900 and WLR8900 series scanners to read pre printed barcodes.
Subscribe Download PDF

Program the WLR2900, WCS3900 and WLR8900 series scanners to read pre printed barcodes.

Sicaro Burnett
2023-01-20
in WCS3900/3905/3950

The WLR2900, WCS3900 and WLR8900 series scanners have minimum and maximum length scanning enabled by default.  It may be necessary to modify the minimum length to read Code 128 barcodes with fewer than 5 characters.

If the scanner's user guide is available, use the instructions below to set the minimum length to 1.  If the guide is not available, use the following link to download the Code 128 Minimum Length programming sheet.

 

Code 128 Minimum Length Programming Sheet

 

Models WLR2900 & WCS3900

To scan shorter Code 128 barcodes:

1. On page 18, scan the Minimum Length barcode (Code 128).

2. On page 33, scan the 0 barcode then the 1 barcode.

3. On page 18, scan the Minimum Length barcode again.

 

 

Model WLR8900

To scan shorter Code 128 barcodes:

1. On page 16, scan the Minimum Length barcode (Code 128).

2. On page 26, scan the 0 barcode then the 1 barcode.

3. On page 16, scan the Minimum Length barcode again.

 

 

Rate the quality of this page

This page was helpful :) :( This page was not helpful

9 of 11 people found this page helpful


Quick Jump
  • Wasp Helpdesk
  • Knowledgebase
  • News
  • Contact Us
Top
Helpdesk software provided by Deskpro