Navigate
Wasp Helpdesk
  • Register

  • or
  • Login
    Need a password reminder?
or
Contact Us
  • Get in touch

    Send us an email

  • Start a chat session

  • Knowledgebase Read help articles
  • News News & updates
  • Contact Us We are here to help
  • Training View our options
  • Product Sunsets Non-Supported Products
Barcode System Consult
Barcode Printer Consult
Barcode Label Consult
  • Portal
  • Knowledgebase
  • Hardware
  • Scanners
  • How to configure the scanner to output a USPS tracking number properly
Subscribe Download PDF

How to configure the scanner to output a USPS tracking number properly

Scott Leonard
2023-01-20
in Scanners
How to configure the scanner to output a USPS tracking number properly

This article applies to the following scanner models:
WWS100i, WWS550i, WWR2905 (FM3 firmware), WCS3950, WLR8950, and possibly others.

USPS tracking barcodes contain 30 digits, with the last 22 digits representing the tracking number as printed on the label. Use the configuration document at the link below to program the scanner to skip the initial 8 digits, then send the remaining 22 digits (for any 30-character barcode with the EAN128 symbology).

https://dl.waspbarcode.com/kb/scanner/USPSTrackingNumber.pdf

Rate the quality of this page

This page was helpful :) :( This page was not helpful

22 of 59 people found this page helpful


Quick Jump
  • Wasp Helpdesk
  • Knowledgebase
  • News
  • Contact Us
Top
Helpdesk software provided by Deskpro