Navigate
Wasp Helpdesk
  • Register

  • or
  • Login
    Need a password reminder?
or
Contact Us
  • Get in touch

    Send us an email

  • Start a chat session

  • Knowledgebase Read help articles
  • News News & updates
  • Contact Us We are here to help
  • Training View our options
  • Product Sunsets Non-Supported Products
Barcode System Consult
Barcode Printer Consult
Barcode Label Consult
  • Portal
  • General
  • DISINFECTING RECOMMENDATIONS FOR WASP SCANNERS & MOBILE PRODUCTS
Subscribe Download PDF
Mar
20

DISINFECTING RECOMMENDATIONS FOR WASP SCANNERS & MOBILE PRODUCTS

Sicaro Burnett
in General

DISINFECTING RECOMMENDATIONS FOR WASP SCANNERS & MOBILE PRODUCTS 


To disinfect scanner/device surfaces, Wasp Barcode Technologies recommends using one of the two following solutions: 

•Isopropyl Alcohol (70% solution at a minimum)

•Household Bleach (5-6% sodium hypochlorite) - ½ cup bleach diluted in 1 gallon of water

Both options are recommended by the CDC as effective disinfecting solutions. Cleaning procedure is detailed below. 

For more generalized information, please visit: https://www.cdc.gov/coronavirus/2019-ncov/community/home/cleaning-disinfection.html

Use a clean paper towel dampened with one of the above solutions to clean and disinfect scan window, display, and exterior surfaces.


CAUTION

DO NOT use abrasive cleaning agents or abrasive pads to clean this product. Harsh chemicals, disinfectants, and cleansers can cause damage which will adversely affect scanning and weighing performance. Do not apply bleach solution to any metal including contacts.

            
        

                      

Rate the quality of this page

This page was helpful :) :( This page was not helpful

17 of 42 people found this page helpful


Quick Jump
  • Wasp Helpdesk
  • Knowledgebase
  • News
  • Contact Us
Top
Helpdesk software provided by Deskpro