Reset your WDT 2200:
- Switch off the unit while at the same time press and hold the following 3 keys:
CMD+ left arrow+switch on
A menu should now show up on the screen that says:
2. WARM START
3. COLD START
- Press 3. COLD START
A new screen appears stating:
WILL DELETE ALL
Are you Sure ? _
- Press 1 for YES
Now the screen should say:
MEM 2560 kb
Resend the program & data from the PC to the WDT2200:
- Make sure your WDT2200 is linked to the PC.
- Go to Mobile Devices/PDT/WDT2200/Setup device.
- Select Auto Detect COM Port Settings (please wait a few moments until these is completed).
- Then create the PDT database (At this stage, select All for the filter records) and send data from the PC to the PDT.