Windows print driver for WPL Label Printers (see below for full list of models). This driver is compatible with 32-bit and 64-bit versions of Windows 10, 8, 7, Vista, XP, and Windows Server 2003, 2008, 2012, 2016.
Click on the link below or copy the link to your web browser:
Before installing the driver to a new printer, turn on the printer, wait for the status light to display green, then plug its USB cable into the PC. After Windows installs its USB Printing Support driver (seen in Devices and Printers under Unspecified), the printer is ready for driver installation.
Run the downloaded file, which extracts the drivers and runs the DriverWizard. You will see references to Seagull Scientific, Inc., which is normal. Follow the prompts to upgrade an older driver, or install a new driver.
If there is an older version of the driver installed, the DriverWizard can upgrade in place. Reboot the PC if prompted. After you log back in, it may prompt to reboot again; please do so. When you log in again, it should confirm removal of the old driver(s).
After installing the driver, configure the printer properties (in Devices & Printers, or Printers & Faxes) with the correct label size, since it will be set back to the default.
Below is the full list of printers supported by this driver (sorted by number). All entries are for the standard 203 DPI print head, unless otherwise specified.
WPL-305 (includes WPL305E)
WPL308-300 (300 DPI print head)
WPL308-600 (600 DPI print head)
WPL-608-300 (300 DPI print head)
WPL-610-300 (300 DPI print head)
WPL612-300 (300 DPI print head)
WPL612-600 (600 DPI print head)
WPL614-300 (300 DPI print head)
WPL614-600 (600 DPI print head)
WPL618-300 (300 DPI print head)
WPL618-600 (600 DPI print head)
WPL-644 (600 DPI print head for WPL608, WPL610, WPL612)